Fliteboard is more than a surfboard. Similar to any other electric powered vehicle, it needs to be serviced regularly and maintained to ensure good working order and to prevent breakage.Please refe...
See more
1. Fliteboard recommends that all Fliteboard equipment be stored and if required, charged between 22°C (72°F) and 28°C (82°F) in a safe, dry place that is away from flammable objects/surfaces for m...
See more
Post ride
1. Open the board lid slowly, take care not to let it fall on the nose of the board. (If the lid is opened too far it may fall and damage the nose of the board).
2. After each ride, check...
See more
Post ride
1.Wash the inflatable bladder with warm soapy water and dry before storage.
2.The inflatable bladder can remain inflated, or be deflated and stored on or off the carbon insert to suit you...
See more
Post ride
1. Disconnect the Flitecell power cables.
2. Disconnect the data cables, both receiver and Flitecell CANbus cable (Series 1).
3. Rinse thoroughly with clean fresh water after every use. D...
See more
Post Ride
1. Rinse the Flite Controller in fresh water to clean away salt and debris. Ensure a steady stream of fresh water is applied directly into the trigger housing. While doing so press and de...
See more
Post Ride
1. Wipe Flitecell down with a wet cloth (freshwater), and clean Flitecell contacts and data connector with Contact Cleaner.
2. Flitecell is water resistant but it should remain dry where ...
See more
